Casio EA-200 - Manual (Page 30)

20031201
3-11
Setup
The graphs below show when sampling is triggered while [Above] is specified for [Trigger
Level]. The graphs show changes in sampled values over time, and the left end of the graph
is when the sampling operation is executed.
Threshold value
Sampling triggered Sampling triggered
Microphone Start Trigger
Additional Parameter Initial Default Range
Sensitivity High Low, Medium, High
Sensitivity: Specify one of three sensitivity levels for the EA-200’s microphone.
Configuring Graph Window Options
This section explains how to configure the settings of the [Graph] tab of the Setup dialog
box.
u To configure graph window options
(1) On the Sensor Setup window menu bar, tap [Setup].
• This displays the [Sample] tab of the Setup dialog box.
(2) Tap the [Graph] tab.
(3) Select the check boxes of the options you want to turn on, and clear the check boxes of
the options you want to turn off.
• The check boxes next to the options that are turned on have check marks in them.
(4) After everything is the way you want, tap [Set].
• This applies your settings and closes the Setup dialog box.