Casio EA-200 - Manual (Page 50)

20031201
7-3
Using the Multimeter Window
u To view real-time sample data during sampling configured with the
[Multiple] tab
(1) On the Sensor Setup window, display the [Multiple] tab and configure the settings you
want.
• You can also recall previously saved setup data (page 4-2).
(2) Tap v.
• This displays the Multimeter window and starts sampling with the sensors connected
to the channels specified on the [Multiple] tab. Sampled data is displayed in real-time
on the Multimeter window.
(3) To close the Multimeter window, tap [Cancel].
Tip
• Tapping the [Store] button on the Multimeter window saves the current sample to a specified
matrix variable (EConSamp\MultMat). See “Saving Sample Data from the Multimeter Window” on
page 7-4 for more information.
Shows sampled values in real-
time for the channels specified
on the [Multiple] tab. Nothing is
shown for unused channels.