Casio EA-200 - Manual (Page 16)

20031201
2-6
Basic Steps for Configuring Sampling Parameters
u To configure a setup for Photogate and Smart Pulley
In step (3) of the procedure under “To configure parameters for sampling with a single
sensor” on page 2-1, select [Photogate (Pulley)] on the [Vernier] tab for the sensor. This
causes the parameters described below to appear on the Sensor Setup window that appears
in step (4).
Parameter Initial Default Description
(Channel) SONIC CH1: Select this option when the Photogate
(Pulley) sensor is connected to CH1.
SONIC: Select this option when the Photogate
(Pulley) sensor is connected to SONIC.
Distance 1m Input a value in the range of 0.1 to 4 to specify the
distance in meters.
Store List Folder EConSamp Specify the variable folder for storage of time,
Data distance, velocity, and acceleration data.
Time Time Input a variable name up to eight characters long for
storage of time data.
Distance Distanc Input a variable name up to eight characters long for
storage of distance data.
Velocity Velocity Input a variable name up to eight characters long for
storage of velocity data.
Accel Accel Input a variable name up to eight characters long for
storage of acceleration data.
Tip
• The menu bar’s [Setup] button is unavailable while [Photogate] or [Photogate (Pulley)] is
selected.