Casio EA-200 - Manual (Page 11)

20031201
2-1
Basic Steps for Configuring Sampling Parameters
2 Basic Steps for Configuring Sampling
Parameters
This chapter explains the basic operations you need to perform when configuring EA-200
sampling parameters from the E-Con EA-200 application. Before performing any of the
procedures in this chapter, be sure to connect the EA-200 to your ClassPad.
Configuring Parameters for Sampling with a Single Sensor
Use the [Single] tab of the Sensor Setup window to configure the parameters for a single
sensor.
• The procedure for configuring sampling settings on the [Single] tab is similar to a Windows
Setup Wizard. As you select a sensor and input setting values on the [Single] tab, settings
are adjusted automatically in order to make it possible to perform sampling properly. Even if
you are configuring settings for a single sensor, you should use the [Multiple] tab when you
want to configure all of the detailed settings yourself.
u To configure parameters for sampling with a single sensor
(1) Start up the E-Con EA-200 application.
• This displays the [Single] tab of the Sensor Setup
window.
• If the E-Con EA-200 application is already running
and another window (besides the Sensor Setup
window) is displayed, tap C to change to the Sensor
Setup window.