Casio EA-200 - Manual (Page 12)

20031201
2-2
Basic Steps for Configuring Sampling Parameters
(3) Select the sensor you will use for sampling.
• Tap one of the tabs ([CASIO], [Vernier], [Custom]), and then tap the option button
next to the name of the sensor you want to select. For details about each of the
selectable sensors, see the “10 Sensor List”.
• Tapping the [Custom] tab displays a sheet for configuring the parameters of a user-
defined custom probe. For more information, see “Using a Custom Probe” on page
3-12.
(4) After selecting a sensor, tap [Set].
• This closes the Select Sensor dialog box. The Sensor Setup window now shows the
name of the sensor you selected, along with boxes for the sample range and total
elapsed sampling time (Total Sampling Time).
• The example screen below shows what would appear if when the CASIO
Temperature (
°C) sensor is selected.
Name of channel where the
selected sensor is connected
(2) Tap the [Sensor] box.
• This displays a Select Sensor dialog box like the one
shown to the right.