Interlogix NS3500-28T-4S User Manual - Manual (Page 71)

71
The page includes the following fields:
Object Description

Server Address Indicates the SNMP trap destination address. It allows a valid IP address in
dotted decimal notation ('x.y.z.w'). It can also represent a legally valid IPv4
address. For example, '::192.1.2.34'.
 SNMP Version Indicates the SNMP trap supported version. Possible versions are:

SNMP v1 : Set SNMP trap supported version 1.

SNMP v2c : Set SNMP trap supported version 2c.
 Notify Type Set the notify type in traps or informs.
 Community Name Indicates the community access string when send SNMP trap packet.
 UDP Port Indicates the SNMP trap destination port. SNMP Agent will send SNMP
message via this port, the port range is 1~65535.
 Time Out Indicates the SNMP trap inform timeout. The allowed range is 1 to 300.
 Retries Indicates the SNMP trap informs retry times. The allowed range is 1 to 255.
Buttons
: Click to add a new SNMPv1, 2 host entry.
Figure 4-2-32 SNMPv1, 2 Host Status Page Screenshot
The page includes the following fields:
Object Description

Server Address Display the current server address.
 SNMP Version Display the current SNMP version.
 Notify Type Display the current notify type.
 Community Name Display the current community name.