Interlogix NS3500-28T-4S User Manual - Manual (Page 67)

67
4.2.7.5 SNMP Community
Configure SNMP Community on this page. The SNMP Community screens in Figure 4-2-27 & Figure 4-2-28 appear.
Figure 4-2-27 Community Setting Page Screenshot
The page includes the following fields:
Object Description

Community Name Indicates the community read/write access string to permit access to SNMP
agent.
The allowed string length is 0 to 16.
 Community Mode Indicates the SNMP community supported mode. Possible versions are:

Basic : Set SNMP community mode supported version 1 and 2c.

Advanced : Set SNMP community mode supported version 3.
 Group Name A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 16.
 View Name A string identifying the view name that this entry should belong to.
The allowed string length is 1 to 16.

Access Right
Indicates the SNMP community type operation. Possible types are:
RO=Read-Only : Set access string type in read-only mode.
RW=Read-Write : Set access string type in read-write mode.
Buttons
: Click to apply changes.