Interlogix NS3500-28T-4S User Manual - Manual (Page 263)

263
 Write Delay Display the current write delay.
 Timeout Display the current timeout.
4.9.7.7 Rate Limit
After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software transmission.
The DHCP Rate Limit Setting and Config screens in Figure 4-9-42 & Figure 4-9-43 appear.
Figure 4-9-42 DHCP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select port for this drop down list.
 State Set default or user-define.
 Rate Limit (pps) Configure the rate limit for the port policer. The default value is "unlimited".
Valid values are in the range 1 to 300.
Buttons
: Click to apply changes.