Interlogix NS3500-28T-4S User Manual - Manual (Page 40)

40
up configuration file, which is called configuration save. To prevent illicit file
upload and easier configuration, switch mandates the name of running
configuration file to be running-config.
 Startup Configuration Refers to the configuration sequence used in switch startup. Startup
configuration file stores in nonvolatile storage, corresponding to the so-called
configuration save. If the device supports multi-config file, name the configuration
file to be .cfg file, the default is startup.cfg. If the device does not support
multi-config file, mandates the name of startup configuration file to be
startup-config.
 Backup Configuration The backup configuration is empty in FLASH; please save the backup
configuration first by “Maintenance > Backup Manager”.
Buttons
: Click to save configuration.
4.1.2.1 Saving Configuration
In the Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration sequence
of running-config can be saved from the RAM to FLASH by ”Save Configurations to FLASH” function, so that the running
configuration sequence becomes the startup configuration file, which is called configuration save.
To save all applied changes and set the current configuration as a startup configuration. The startup-configuration file will be loaded
automatically across a system reboot.
1. Click ”Save > Save Configurations to FLASH” to login “Configuration Manager” Page.
2. Select “Source File = Running Configuration” and “Destination File = Startup Configuration”.