4 igmp group table, 5 igmp router setting – Interlogix NS3500-28T-4S User Manual User Manual
Page 175
175
4.7.2.4 IGMP Group Table
This page provides Multicast Database. The IGMP Group Table screen in
Figure 4-7-14
appears.
Figure 4-7-14
IGMP Group Table Page Screenshot
The page includes the following fields:
Object
Description
VLAN ID
Display the current VID.
Group IP Address
Display multicast IP address for a specific multicast service.
Member Port
Display the current member port.
Type
Member types displayed include Static or Dynamic, depending on selected
options.
Life(Sec)
Display the current life.
4.7.2.5 IGMP Router Setting
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier.
Therefore, if the IGMP querier is a known multicast router/ switch connected over the network to an interface (port or
trunk) on your Managed Switch, you can manually configure the interface (and a specified VLAN) to join all the current
multicast groups supported by the attached router. This can ensure that multicast traffic is passed to all the appropriate
interfaces within the Managed Switch.
The IGMP Router Setting and Status screens in
Figure 4-7-15
&
Figure 4-7-16
appear.