2 configuration manager – Interlogix NS3500-28T-4S User Manual User Manual
Page 39

39
4-1-6
appears.
Figure 4-1-6
Save Button screenshot
The page includes the following fields:
Object
Description
Save Configuration to
FLASH
Click to save the configuration. For more detail information; please refer to the
chapter 4.1.2
Restore to Default
Click to reset switch in default parameter. For more detail information; please
refer to the chapter 4.15.1
4.1.2 Configuration Manager
The system file folder contains configuration settings. The screen in
Figure 4-1-7
appears.
Figure 4-1-7
Save Button screenshot
The page includes the following fields:
Object
Description
Running Configuration
Refers to the running configuration sequence use in the switch. In switch, the
running configuration file stores in the RAM. In the current version, the running
configuration sequence running-config can be saved from the RAM to FLASH by
save “Source File = Running Configuration” to “Destination File = Startup
Configuration
”, so that the running configuration sequence becomes the start