Interlogix NS3500-28T-4S User Manual - Manual (Page 50)

50
The page includes the following fields:
Object Description
 Enable SNTP
Enabled : Enable SNTP mode operation.
When enable SNTP mode operation, the agent forward and to
transfer SNTP messages between the clients and the server when
they are not on the same subnet domain.
Disabled : Disable SNTP mode operation.
 Manual Time To set time manually.
 Year - Select the starting Year.
 Month - Select the starting month.
 Day - Select the starting day.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Seconds - Select the starting seconds.
 Time Zone Allow select the time zone according to current location of switch.
 Daylight Saving Time This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration. Select
'Disable' to disable the Daylight Saving Time configuration. Select 'Recurring'
and configure the Daylight Saving Time duration to repeat the configuration
every year. Select 'Non-Recurring' and configure the Daylight Saving Time
duration for single time configuration. (Default: Disabled).
 Daylight Saving Time
Offset
Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to
1440 )
 Recurring From  Week - Select the starting week number.
 Day - Select the starting day.
 Month - Select the starting month.
 Hours - Select the starting hour.

Minutes - Select the starting minute.
 Recurring To  Week - Select the starting week number.
 Day - Select the starting day.
 Month - Select the starting month.
 Hours - Select the starting hour.

Minutes - Select the starting minute.
 Non-recurring From  Week - Select the starting week number.