IC Realtime 4/8 All Channel 720P Mini 1U HD-AVS DVR - Manual (Page 50)

41
 Preset, tour and pattern all need the value to be the control parameter. You can define it as you
require.
 You need to refer to your speed dome user ’s manual for Aux definition. In some cases, it can be
used for special process.
 The following setups are usually operated in the
X332H332H332H
Figure 4-36, Figure 4-39 and Figure 4-40.
4.9.1Preset Setup
In Figure 4-36, use eight direction arrows to adjust camera to the proper position.
In Figure 4-39, click preset button and input preset number. The interface is shown as in Figure 4-41.
Now you can add this preset to one tour.
Figure 4-41
4.9.2 Activate Preset
In Figure 4-40, please input preset number in the No. blank, and click preset button.
4.9.3 Patrol setup (Tour Setup)
In Figure 4-38, click patrol button. The interface is shown as in Figure 4-42.Input preset number and add
this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets.
Figure 4-42
4.9.4 Activate Patrol (tour)
In
X341H341H 341H
Figure 4-39, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In Figure 4-39 , click pattern button and then click “begin” button. The interface is shown as in Figure
4-43. Then you can go to Figure 4-36 X to modify zoom, focus, and iris.
Go back to Figure 4-43 and click “end” button. You can memorize all these operations as pattern 1.