IC Realtime 4/8 All Channel 720P Mini 1U HD-AVS DVR - Manual (Page 155)

146
At the bottom of the interface, there is a process bar for your reference.
7.10 Alarm
Click alarm function, you can see an interface is shown as Figure 7-95.
Here you can set device alarm type and alarm sound setup.
Figure 7-95
Please refer to the following sheet for detailed information.
Please make sure current device can upload the alarm.
Type Parameter Function
Alarm
Type Video loss System alarms when video loss occurs.
Motion detection System alarms when motion detection alarm
occurs.
Camera
masking System alarms when camera is viciously masking.
Disk full System alarms when disk is full.
Disk error System alarms when disk error occurs.
Operation
Prompt Check the box here, system can automatically
pops up an alarm icon on the Alarm button in the
main interface when there is an alarm.
Alarm
Sound Play alarm
sound System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Sound path Here you can specify alarm sound file.
7.11 Log out
Click log out button, system goes back to log in interface. See Figure 7-96.
You need to input user name and password to login again.