FingerTec TCMS V2 (Abridged Vesion) - Manual (Page 24)

25
The Clocking Schedule window, with the Overtime tab chosen
5.4.13 Do you want the automatic addition to apply on total
hours exceeds per day?
Clicking Yes here will configure the system to automatically add the
break time to an employee’s total work hours by day only instead of
by number of punches. This will only apply if the Double Punch setting
is activated.
5.5 OVERTIME
Overtime is to determine the rules for overtime in the flexi locking schedule you
define here.
5.5.1 Claim overtime
Minimum work hour to claim overtime: Sometimes a staff would work
only for a few minutes and consider it as OT; define the minimum min-
utes required by the company for a staff to work in order to qualify for
an OT claim.
Maximum work hour to claim overtime: Put a limit to a number of hour
a staff could claim for overtime. The default maximum is 24 hours.