3) during playback, press [pause 11, 4) press [play^] to resume playback, 5) press [stop ■] to stop playback – Toshiba D-VR610KU User Manual
Page 99: 6) press [open/close to eject the cassette tape, Press [vcr] first, 1) press [rec •] to begin the recording, 2) press [stop ■] when the recording is completed, Vcr functions, En 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR FUNCTIONS
^VHS
1) Press [I/O ON/STANDBY] on the remote control or
the front panel of the unit.
When you are playing back a cassette tape, turn on the
TV and be sure to select the input to which the unit is
connected.
Press [VCR].
2) Insert a prerecorded cassette tape. Press [PLAY
to begin playback.
3) During playback, press [PAUSE 11].
Playback will pause and sound will be muted.
4) Press [PLAY^] to resume playback.
5) Press [STOP ■] to stop playback.
6) Press [OPEN/CLOSE to eject the cassette tape.
Note
• When a cassette tape ends during playback, fast
forward or normal recording, the unit will
automatically rewind to the beginning of the
cassette tape. After rewinding finishes, the unit will
eject the cassette tape.
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[TRACKING \///\].
Recording
Press [VCR] first.
Before recording, make sure:
• The appropriate external Input position (L1/L2) to which
your external tuner is connected is selected by pressing
[INPUT SELECT-©].
• There is a cassette tape with an erase-protection tab in
the unit.
• The desired recording speed is selected in SP (standard
playback) or SLP (super long playback) mode by
pressing
[REC MODE].
Recording speed:
Tape speed
Recording / playback time
Type of tape
T60
T120
T160
SP
Ihour
2hours
2-2/3hours
SLP
Bhours
6hours
Shours
• Refer to pages 38-41 for instructions on timer recording.
1) Press [REC •] to begin the recording.
To temporarily stop recording or to resume it, press
[PAUSE
11
].
After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
2) Press [STOP ■] when the recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover 7
.
the hole with cellophane tape.
erase-protecttontab
EN 99