Editing discs – Toshiba D-VR610KU User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EDITING DISCS
mm
3
Use [SKIP !◄◄/►►!],
[REV ◄◄], [FWD ►►], [PLAY ►] and
[PAUSE 11] to find the start point,
then press [ENTER].
Use [▲ / ▼] to select ‘
press [ENTER].
’Delete" then
Then use [SKIP / ►►!],
[REV ◄◄], [FWD ►>], [PLAY ►] and
[PAUSE 11] again to move to the end
point, and press [ENTER].
The cursor will move to "Preview".
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the
area selected for deletion is indicated in red.
You can check the preview by pressing
[ENTER].
• Before and after 5 seconds of the deleted point
will be playback for preview.
start point end point
Before
editing
•
T
$
Edited
•
T
$
5
Use
[A
/ ▼] to select "Yes" then press
[ENTER].
"Are you sure?" will appear. Select "Yes" using
[A
/▼] and then press
[ENTER].
The part of the title is deleted.
6
Press [RETURN] and then [RETURN] or
[STOPS] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
80 EN