Press [rec •] to start recording, This operation may take awhile to be completed – Toshiba D-VR610KU User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press [REC •] to start recording.

will be displayed for 5 seconds.

Press [STOP ■] to stop recording.

The recorded title will be included in the title list.

(Refer to “Guide to a Title List" on page 70.)

Press [PAUSE II] to pause recording.
Press [PAUSE 11] or [REC •] again to restart
recording.

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks

of 30 minutes.

Press [REC •] repeatedly until the desired recording

time (30 minutes to 8 hours) appears on the TV screen.

One-touch timer recording will start.

This operation may take

awhile to be completed.

^0:30.^

(normal recording) 1:00

8:00

7:30

• To change the recording length during one-touch

timer recording, press [REC •] repeatedly until the
desired length appears.

• To cancel one-touch timer recording within the

specified time, press [STOP!].

Note

• When you press [REC #], recording starts immediately and continues until the disc is full or you stop recording.

• When the unit clock has not been set, the space for a date and time of title names will be blank.

• You cannot change the recording mode during the recording pause mode.

Note for one-touch timer recording

• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press

[DISPLAY] to see it on the TV screen.

• Unlike the timer recording, you can perform the following operations during one-touch timer recording.

; - Turning off the power (One-touch timer recording will be canceled.).

- Using [REC #] or [STOP ■] on the remote control.

• You cannot use the pause function during one-touch timer recording.

• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode

and the VCR keeps the current mode.

• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby

mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby
mode to use the unit continuously.

EN 37