Toshiba D-VR610KU - Manual (Page 101)

Time Search
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
1) Press [SEARCH] repeatedly so that "TIME SEARCH"
menu appears.
2) Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
VCR FUNCTIONS
3) Press [REV ◄◄], [FWD ►►] to start time search.
If you want to go in the forward direction, press
[FWDP>].
If you want to go in the reverse direction, press
[REV^^].
After time search, the unit will play back the cassette
tape automatically.
Note
• Index search and time search are not available
during recording.
• Press [STOPS] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [FWD ►►] to fast
forward the cassette tape.
Rewind:
When the unit is in stop mode, press [REV «] to rewind
the cassette tape.
To cue or review picture during playback (picture search):
Press [REV «1 [FWD ►►] during playback.
Press it again and the unit will search in super high
speed, (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
Press [PAUSE 11 ]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing
[TRACKING /\ / \ / ]
on remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, If equipped.
Counter reset:
Press [CLEAR] to reset the counter to "0:00:00".
To playback in slow motion:
Press [PAUSE 11] during playback, then press [FWD ►►].
Press [FWD ►►] or [REV ^4r4] repeatedly to select the
desired speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to
its end, the cassette tape will rewind to the beginning,
stop and eject itself.
To repeat a playback indefinitely without touching
[PLAY^] (Auto Repeat Playback):
During normal playback, press [REPEAT]. When a tape is
played to its end, the tape will rewind to the beginning and
start playback itself. To cancel the Auto Repeat Playback,
press
[REPEAT] again.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO CB>] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select "HIFI".
• If you have connected a monaural TV to this unit, select
"MONO".
^ Your Selection HIFI
MONO
Type of recorded tape \ L-channel R-channel
non Hi-Fi tapes M onaural M onaural M onaural
•Hi-Fi tapes
recorded in
Hi-Fi stereo
L R L+R
Hi-Fi tapes
recorded m ain
audio program M ain audio
program
M ain audio
program
M ain audio
program
Hi-Fi tapes
recorded second
audio program
Second audio
program
Second audio
program
Second audio
program
Note
* Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY^].
EN 101
i/i
S i
3
^ \
: s '
: