Available for dvd only, Analog audio, Method 1 – Toshiba D-VR610KU User Manual

Page 21: Method 2, Connection to a tv, En 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONNECTION TO A TV

Make one of the following connections, depending on the capabilities of your existing device.

VCR and basic DVD connection

Available for DVD only

analog audio

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.

I • If S-video cable is connected to the S-VIDEO OUT
I jack, the picture from the VCR will not be displayed.

I • Connect this unit directly to the TV. If the RCA audio/
I video cables are connected to a VCR, pictures may be
I distorted due to the copy protection system.

I • You will not be able to hear the sound being output

I from DVD if you are not connecting DVD AUDIO OUT
I when you made either S-video or component video
I out connection.

I • Progressive signal will not be output from the
" VIDEO OUT or S-VIDEO OUT jack.

VIDEO OUT

Method 1

Method

good picture

better picture

S-video cable

* •

S-VIDEO OUT

VIDEO OUTPUT

3:0

To set progressive scan mode, refer to page 94
• This unit is compatible with the progressive scan system. The

feature provides you the higher quality images than the
traditional output system. To utilize this feature, you must

set "Progressive" to "ON".

After you have completed the connections

• Switch the input selector on your TV to an appropriate

external input channel. Press a button on the TV's
original remote control that selects an external input
channel until the DVD recorder's opening picture
appears. Check your TV owner's manual for details.

EN 21