Format (default: rgb), General, Setting – Toshiba D-VR610KU User Manual
Page 96
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GENERAL
SETTING
HOMI
1
Press [SETUP] in stop mode and use
[
a
/ T]
to select "General Setting",
then press [ENTER],
2
Use
[A / T]
to select "HDMI", then
press [ENTER],
HUMI
3
• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.
Use
[
a
/ ▼ ] to select a desired item,
then press [ENTER],
Format
HMA
ik
S
o
RGBF
4
o
When you finish with the setting,
press [SETUP] to exit.
Format (Default: RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use
[A
/
T]
to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal Is output as RGB regardless of the
setting.
Your setting will be activated.
96 EN