2 channel analog audio connection stereo system, Multi channel digital audio setting, Setup >general setting >playback >audio out – Toshiba D-VR610KU User Manual
Page 24: Nnection to an audio system, 24 en
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
msn
NNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the owner's manual accompanying external devices for more information.
2
Channel Analog Audio Connection
stereo system
Digital Audio Connection
Dolby Digital decoder
""MD deck or DAT deck can be also connected through coaxial jack.
Please purchase the rest of the necessary cables at your local store.
Multi Channel Digital Audio Setting
Setting
Connection
Setup >General Setting >Playback >Audio Out >
Dolby Digital
If output is Dolby Digital encoded audio, connect to
a Dolby Digital decoder.
Stream
OFF
If output is DTS encoded audio, connect to a DTS
decoder.
PCM
ON
If output is encoded audio for both Dolby Digital and
DTS, connect to the decoder which encodes multiple
audio sources.
Stream
ON
Connecting to an MD deck or DAT deck.
If not connected to any external devices.
PCM
OFF
PCM
OFF
^ To complete these settings, refer to page 89.
Note
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
24 EN