Wbwor«lina(qtb), Vcr functions, 100 en – Toshiba D-VR610KU User Manual
Page 100: Display, You cannot pause the one-touch timer recording, Timer set
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR FUNCTIONS
One-touch Tinier
wBwor«lina(QTB)
(Normal recording)
N8:00)
►•(0:30) •
(
1
:
00
)
- •(7:30) ^
-
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-touch
timer recording, press
[REC
•] repeatedly until the
desired length appear.
To cancel the one-touch timer recording within the
specified time, press
[STOP ■].
Atoft-, '
' / ' ,
'V,
• The remaining recording time will be displayed on
the h^ont panel display during one-touch timer
recording. Press
(DISPLAY]
to see It on the TV screen.
• You cannot pause the one-touch timer recording.
• If VCR the one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power (One-touch timer recording
will be canceled.).
'
'
-
'
U
s
i
n
g
o
r
^
y
i
- " , ^
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
standby mode automatically if a timer recording has
been programmed. Press
[TIMER SET]
to cancel the
standby mode for using the unit continuously.
ln<
This feature allows you to set the recording length simply
by pressing
[REC
•] on the remote control.
Press [VCR] first.
1) During normal recording, press [REC •] to begin
the one-touch timer recording.
You can select a fixed recording time by pressing
[REC
•] repeatedly.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that "INDEX SEARCH" menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
3) Press [REV ◄◄], [FWD ►►] to start index search.
If you want to go in the forward direction, press
[FWDP^].
If you want to go in the reverse direction, press
[REV ◄◄].
After index search, the VCR will play back the cassette
tape automatically.
CURRENT PROGRAM
Beginning |
of tape
End
of tape
Pro.1
Pro.3
Pro.4
Pro.5
02 01
01
02
03
t
INDEX MARK
mmmmmmrnmmm
Note
• You can make the Index mark up to 20.
100 EN