A recording system using two odot units, A recording system using one adat – KORG Soundlink DRS REcording Console 168RC User Manual

Page 91

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapters. Reference

A recording system using two odot units

O Use an ADAT-SYNC cable to connect the SYNC OUT of the first adat to the SYNC IN of the

second adat. Operations on the first unit will cause the second unit to function as well.

e Use ADAT-OPTICAL cables to connect the Digital OUT of each adat to the 168RC's adat

OPTICAL IN A and B. In the same way, connect the Digital IN connectors of each adat to the
168RC's adat OPTICAL OUT A and B connectors.

O In the 168RC's MISC mode, set CLK Source to "INTERNAL."

If the first unit is an adat XT, set the adat XT's CLOCK SOURCE to "DIG 48K".

O Iri INPUT mode, assign "DIG-A1"~"DIG-A8” and "DIG-B1"~"DIG-B8" to appropriate chan

nels.

adat

Master recorder (DAT)