KORG Soundlink DRS REcording Console 168RC - Manual (Page 49)

Chapters. Parameters
Eff Memory
Here you can manage effect memories. Up to 50 effect memories can be used (common to both
Effl and Eff2).
Write [WRITE]:
Write (save) the effect settings selected for the currently-accessed mode into the highlighted effect
memory. Any settings which were previously in that effect memory will be overwritten and lost.
O Notice the [EFF 1]/[EFF 2] key LED indicators show the effect that will be written into effect
memory.
O Highlight the writing destination, either by rotating knob [8] or by using the [ ,^ ]/[ N/ ] keys.
O Press knob [1] ("[WRITE]"). The display will ask "Are You Sure? [YES] [NO]."
O If you wish to write the data into memory, press knob [5] [YES] to execute the write operation.
If you decide not to write, press knob [6] [NO].
Lock [LOCK]: This will protect an effect memory so that it cannot be overwritten.
O Highlight the effect memory that you wish to protect, either by rotating knob [8] or by using
the [ ^ ]/[ V ] keys.
O Press knob [3] ("[LCXIK]"). A "L" symbol will appear at the right of the effect memory name, and
it will no longer be possible to save data to that memory. If you select "[LOCK]" once again, the
"L" symbol will disappear, and it will once again be possible to save data to that memory.
Name [NAME]: This lets you modify the effect memory name.
O Highlight the effect memory that you wish to rename, either by rotating knob [8] or by using
the [ /N ]/[ N/ ] keys.
O Press knob [4] ("[NAME]"), and the Eff Name page will appear. For the procedure of modify­
ing the name, refer to the "Prog.Name" item that was discussed earlier in this chapter.
Read [READ]:
This reads the highlighted effect memory into the effect of the currently-selected mode.
O Notice the [EFF 1]/[EFF 2] key LED indicators to show the effect into which the effect settings
will be read.
O By either rotating knob [8] or by using the [ /\ ]/[ \/ ] keys, highlight the effect memory that
you wish to read.
O Press knob [6] ("[READ]") to execute the readioperation. When this operation is executed, the
previous effect settings will be overwritten and lost.
Exit [EXIT]: Exit the Eff Edit page.
Eff NAME
Here you can modify the name of an effect.
EFM.01:[
ABCDEFGfflIJKLMN OPQRSTUUUXVZ 0123456789
abcdef9hiJ klmn opiHrstuywxyz
[EXIT] [<1 [>] [SHFT] («> (») [SEL.][ENTRll
For the procedure of modifying a name, refer to the "Prog.Name" item that was discussed earlier
in this chapter.
42