Pitch shift mod. (pitch shift modulation) – KORG Soundlink DRS REcording Console 168RC User Manual

Page 65

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 4. Effects

16: Pitch Shift Mod. (Pitch Shift Modulation)

This effect uses an LFO to modulate the pitch shift amount of detuning. The effect sound and the

direct sound can be panned to left and right to produce a clear spaciousness. It is especially effec

tive to output the sound from stereo speakers, since the effect sound and the direct sound will be

mixed in the air.

Output

W/D

LEVL

SHFT

-50...+50 cent

Set the pitch difference relative to the input signal.

If 0 WAVE

Triangle, Square

Select the LFO waveform.

LfOFREQ

0.02...15.00 Hz

Set the LFO speed.

DPTH

-50...+50

Set the depth of LFO modulation for the pitch shifter.

Original Pitch •

Pitch Shift Mod - Pitch Shift / Depth

/ i LFO Waveform=Triangie

f Depth (+vaiue)

Pitch Shift (+ value)

T LFO Waveform=Square

Depth (-value)

OutputW/D

0...100

Set the balance between the effect sound and the direct

sound. As this setting is increased, the effect sound will

become louder. With a setting of 100, the effect sound and

direct sound will be output with a balance of 1:1.

Output PAN

L50...101, CNT, R01...R50 Set the left/right position of the effect sound and the di

rect sound. Settings of "L" place the effect sound at left

and the direct sound at right. If Output W/D is at 0, pan

will have no effect.

Output LEVI

0...100

Set the output level.