Pitch shifter – KORG Soundlink DRS REcording Console 168RC User Manual

Page 64

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

15: Pitch Shifter

This effect changes the pitch of the input signal. You can choose one of three types: fast response,
high sound quality, and a type mid-way between these. Since a delay with feedback is used, you
can also create special effects in which the pitch continues to rise (or fall).

MODE

Shift SEMI

Shift FINE

DIAY

FBAK

DAMP

Output PAN

Output LEVEL

Slow, Midi, Fast

Select the operating mode of the pitch shifter. Slow will

result in the least change to the sound quality. Fast will
provide quick response. Midi is between the other two
selections.
If only a small amount of pitch shift is required. Fast is an
appropriate setting. If you need to shift the pitch by a large
interval, you may wish to select

Slow.

-24...+24:l/2tene

Set the pitch shift amount in semitone steps.

-50...+50 cents

Set the pitch shift amount in 1-cent steps.

0...50 mS

Set the time by which the input signal is delayed.

-100...+100

Set the amount of feedback.

Since the sound that is fed back is re-input to the pitch

shifter, the pitch will successively rise (or fall).

0... 100%

Set the amount of high frequency attenuation.

L50...L01, CNT, R01...R50 Set the stereo location of the output.

0... 100

Set the output level.