Eq-early reflection, 22; eq-early reflection – KORG Soundlink DRS REcording Console 168RC User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
22: EQ-Earìy Reflection
22: EQ-Early Reflection
In this effect, the sound passes through a 2-band parametric equalizer and an early reflection
effect (the initial reflections before the reverberant "wash" of sound begins).
Bandi FREQ
100Hz...10.0kHz
Set the center frequency of band 1.
Bandi Q
0.6...8.0
Set the width of the frequency range for band 1. Higher
settings of this value will make the band narrower and
sharper.
Bandi GAIN
-12...+12dB
Set the gain of band 1.
Band2FREQ
100Hz...10.0kHz
Set the center frequency of band 2.
Band2 Q
0.6...8.0
Set the width of the frequency range for band 2.
■ S’ Bandl Q
Band2GAIN
-12...+12dB
Set the gain of band 2.
E.Refledion TYPE
Sharp, Loose,
Modulated, Reverse
Select the decay curve of the early reflections.
“S' p.49 Type
E.Reflection
TIME
10...800mS
Set the length of the early reflections.
E.Reflection
DLAY
0...200mS
Set the time from the original sound until the first early
reflection is heard.
E.Reflection W/D
Dry, 1...99, Wet
Set the balance between the effect sound and the direct
sound.
Out PAN
L50...101,CNT,
R01...R50
Set the pan position of the output.
65