Multiband limiter – KORG Soundlink DRS REcording Console 168RC User Manual

Page 68

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

18: Multiband Limiter

This effect applies separate limiters to the low range, mid range, and high range of the input
signal. Since you can control the dynamics for each frequency range, you can compress the low,
mid, and high ranges in a way different than when an equalizer is used.

Band'Pass FUters

' Low

Limiter

Envelope - ControT)-—

Mid

Offset LOW

Limiter

Envelope - ControT)--—^

Output

LEVL

Output

PAN

__A

High

Offset MID

Limiter

Envelope - Control '

-—°

Output
LEVL

Offset HIGH

Limiter RTIO

1.0:1...50:1, inf; 1

Set the compression ratio.

>®’p.59

Limiter THRE

-40...0 dB

Set the level from which compression will occur. IIS’ p.59

ATCK

1...100

Set the attack time.

'S’p.60

RLSE

1...100

Set the release time.

■ ®’p.60

Offset LOW

-40...0dB

Set the gain of the low range trigger signal.

Offset MID

-40...0dB

Set the gain of the mid range trigger signal.

Offset HIGH

-40...0dB

Set the gain of the high range trigger signal.

For example, if you do not want compression to be ap
plied to the high range, adjust Offset HIGH to lower the level
of the high range trigger signal so that it is lower than the

THRE (Threshold) level. This will mean that the high range

limiter will not respond, and compression will not be ap
plied.

Output PAN

L50...L01, CNT, ROl ...R50 Set the stereo location of the output.

Output LEVL

0...100

Set the output level.