KORG Soundlink DRS REcording Console 168RC - Manual (Page 54)

03: Reverb BrightRoom
02: Reverb Room
This is a reverb in which the early reflections are emphasized, producing a tighter-feeling room.
By adjusting the balance between the early reflections and the reverb sound, you can simulate
different materials for the room's walls.
03: Reverb BrightRoom
This is a bright-sounding room-type reverb.
Output Output
W/D LEVL
Rev.TIME
DAMP
Pre Delay TIME
Pre Delay THRU
ERefLEVL
Rev.LEVL
Pre EQ TRIM
Pre EQ LOW
Pre EQ HIGH
Output W/D
Output LEVL
0.1...3.0S
0
...
100
%
0...100mS
0
...
100
%
Set the reverb time.
Set the high frequency attenuation.
Set the delay time after the direct sound. p.46
Set the amount of the undelayed sound that will be mixed.
0...100
0...100
0...100
-12.0...+12.0dB
-12.0...+12.0dB
Dry, 1...99, Wet
0...100
Set the level of the early reflections.
Set the reverb level.
By adjusting the proportion of the ERef LEVL and the
Rev.LEVL, you can simulate different materials for the
room's walls. Raising ERef LEVEL will produce a harder
feeling, and raising Reverb LEVEL will produce a softer
feeling.
Set the input level to the equalizer.
Set the gain of the low frequency equalizer.
Set the gain of the high frequency equalizer.
Set the balance between the effect processed sound and
the direct sound.
Set the output level.
47