L/c/r delay – KORG Soundlink DRS REcording Console 168RC User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671338/57/background.png)
Chapter 4. Effects
07: L/C/R Delay
This is a multi-tapped delay with three taps: left, right, and center. The left/right spread of the
delayed sound can also be adjusted.
Delay CORS
Delay FINE
RTIO
Level L
Level CNTR
Level R
FBAK
Damp HIGH
Damp LOW
SPRD
OutLEVL
Output
LEVL
O.JOOOmS
0...10 mS
1:2:3...3:2:1,..„
1:4:5...5:4:1
0...100
0...100
0...100
-
100...+100
0
...
100
%
0
...
100
%
0...100
0...100
Set the delay time (10 msec steps).
Set the delay time (1 msec steps).
Set the ratio of delay times between the L, C and R taps.
5 indicates the delay time specified by Delay COARSE
and Delay FINE.
Set the output level of the L tap.
Set the output level of the C tap.
Set the output level of the R tap.
Set the amount of feedback for the C tap.
Set the amount of high frequency attenuation.
Set the amount of low frequency attenuation.
Damp HIGH and Damp LOW set the amount of attenua
tion that will be applied to the high range and low range.
Each time the delay sound is fed back, the tone will be
come darker/lighter.
Set the width of the effect sound.
A setting of 100 will produce the maximum width, and a
setting of 0 will cause both channels of effect sound to be
output from the center.
Set the output level.
50