Bus mode bus assign, Master ta, St-group ql – KORG Soundlink DRS REcording Console 168RC User Manual

Page 45: Master "off, on, St-group, g1 ...g8 "off, on

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapters. Parameters

BUS mode

Bus Assign

Master ta

ST-Group Ql

GIO G2Q1 G30 G4Q) G50 GGO G7Qt G80

OFF OFF OFF OFF OFF OFF OFF OFF

Here you can make settings to specify how the signal of each channel will be sent to master L/R

and to the group buses.

Master

"OFF, ON"

This sends the stereo-panned post-fader signal to master L/R. With a setting of "ON," the signal
will be sent.

ST-Group, G1 ...G8

"OFF, ON"

This sends the signal to the group buses. If ST-Group is "ON," the stereo-panned signal will be
sent. In this case, one of the four pairs of adjacent channels G1-G8 (Gl/2, G3/4, G5/6 or G7/8)
can be selected as the destination.

If ST-Group is "OFF," the mono signal from before pan will be sent. In this case, any two destina
tions G1-G8 can be freely selected. If you select "ON" for a third destination it will blink, and you
will have to turn one of them "OFF."