KORG Soundlink DRS REcording Console 168RC - Manual (Page 55)

Chapter 4. Effects
04: Reverb Wet Plate
This is a simulation of a high-density plate reverb. It produces warm reverberation.
05: Reverb Dry Plate
This is a simulation of a light plate reverb. It produces a dry-sounding reverberation.
Output Output
W/D LEVL
In o-
Pre Delay THRU
Pre EQ
HIGH ——
- Pre Delay
TIME
Reverb
-0^
-0
------------- °
Output Output
W/D LEVL
Rev. TIME 0.1...10.0S Set the reverb time.
DAMP 0...1007o Set the high frequency attenuation.
Pre Delay TIME 0...200mS Set the delay time after the direct sound.
US’ p.46
Pre Delay THRU 0...100% Set the amount of the undelayed sound that will be mixed.
US’ p.46
Pre EQ TRIM 0...100 Set the input level to the equalizer.
Pre EQ LOW -12.0...+12.0dB Set the gain of the low frequency equalizer.
Pre EQ HIGH -12.0...+12.0dB Set the gain of the high frequency equalizer.
OufputW/D Dry, 1...99,Wét Set the balance between the effect processed sound and
the direct sound.
Output LEVL 0...100 Set the output level.
48