KORG Soundlink DRS REcording Console 168RC - Manual (Page 20)

5 .
Parameter editing
5. Parameter editing
This section explains how you can modify parameter values.
O Select a mode
The 168RC has sixteen modes: MISC, Ex.BUS lO, MIDI, PGM, I/S/P, EQ, BUS, INPUT, AUX SND,
EFF SND, PAN, EFFl, EFF2, BUS MASTER, SND MASTER, and METER.
Press a mode key to select the mode in which you wish to edit, and an LED will light to indicate
the selected mode.
MISC PGM INPUT EFFl BUS MASTER
Ex.BUS 10 RECALL I/S/P AUX SND EFF 2 SND MASTER
Q
Select a channel
In I/S/P, EQ, and BUS modes, select the desired channel by pressing a [SEL] key (or a [SOLO]
key).
The upper line of the LCD will show the current channel number. For channels 13-16, the chan­
nels will be selected successively each time you press the [SEL] key.
In INPUT, AUX SND, EFF SND and PAN modes, either press a [SEL] key (or [SOLO] key), or
rotate one of the eight knobs to select a channel.
In other modes, it will not be necessary to select a channel.
0 Select a line
The area in which the numerical values etc. are highlighted is the currently selected line. Modes
may contain two or more lines, and may extend to multiple pages. Arrows ( ^ , ^ , <^ ) dis­
played at the left of the selected line indicate that further lines exist in the indicated direction.
To move between lines, use the [ /\ ] key and [ \/ ] key. In INPUT, AUX SND, EFF SND, and
PAN modes, pressing the [SEL] key will jump to the line for that channel.
Channel number Knob icon
P‘.‘00+prei .. PGM Chi >In/Send/Pan
Input
H
-
ia
-an
__________
Auxl Aux2 Effl Eff2
O O O O
IjJinSI
EB „ HSB Hsa №£■
mssm
ICHT
o
^ Ql SI tifa
Post Post Pre Post
1
Arrow Character display Switch icon Line
13