Brother INTELLIFAX 3650 - Manual (Page 88)

HOW TO USE THE COPY FUNCTION
8. HOW TO USE THE COPY FUNCTION
Making Single and Multiple Copies
Use this function to make a single copy or multiple copies. When making copies, make sure the
text or image on the original document is not too close to the edge. Your fax machine can not read
anything closer than 1/8 inch (4 mm) from the edge of the paper. Original documents should be
straight and not wrinkled or they may jam. Also, do not pull on the paper while copying is in
progress. This may distort the image and damage your machine.
Set the resolution to either PHOTO, FINE or S.FINE. If you select STANDARD, the resolution
will change automatically to S.FINE.
Make sure there is enough paper in the machine. And when making multiple copies, do not let
the receiving tray become overstacked. Remove copied paper from the receiving tray frequently.
Making a Single Copy
Use this function to make a single copy.
1. Insert the documents face down
into the feeder.
2. Press Copy.
3. Press Copy or just wait for 5
seconds.
C
c
[ 0 9 / 1 2 / 1 9 9 8 1 5 : 2 5 ]
( M E M O R Y 1 0 0 % ]
i F A X : N 0 . & S T A R T )
[ C O P Y : P R E S S C O P Y ]
( N O . O F C 0 P I E S : 0 1 ]
( E N T E R & C O P Y K E Y )
{ C O P Y I N G
J
( C O P Y I N G P . O l ]
( C O P Y I N G P . 0 2 )
: )
80