Brother INTELLIFAX 3650 - Manual (Page 44)

USIN(=; IHb UNI I AS A TELEPHONE
Dialing Access Codes and Credit Card Numbers____________________ _
You can store very long dialing sequences by dividing them and setting them up as One Touch
and Speed Dial numbers. Then while dialing, you can combine two or more One Touch and/or
Speed Dial numbers and even include manual dialing using the dial pad. You can use these
numbers in any combination. The combined number will be dialed, in the order you entered it,
as soon as you press Start.
For example:
You store "555" on One Touch 01 and "7000" on One Touch 02. If you press One Touch 01,02
and Start, you can dial "555-7000". To temporarily change a number, you can substitute part of
the number with manual dialing using the dial pad. So, if you press One Touch 01 and press
7001 using the dial pad, you can dial "555-7001".
Using access codes is easy, Sometimes you may want to choose from the among several long
distance carriers when you make a call; rates may vary depending upon the time and destination.
To take advantage of low rates, you can store the access codes or long-distance carriers as One
Touch and Speed Dial numbers.
NOTE; You can set up phone credit card numbers the same way. However, when using
combined dialing, do NOT send a cover page because your credit card number
will be on it!
Searching the Telephone Index ______________________ . _______ _
Once you have stored a name and number as a One Touch number or as a Speed Dial number,
you can search for that name alphabetically using the Telephone Index. You can dial a number
directly from the Telephone Index.
THE DISPLAY WfiL SHOW:
1. Press Tel-index.
2. Use the dial pad to enter the first
character of the stored name, and
press (left arrow) or ► (right
arrow) to find the name.
3. Pickupthehandset,orpressHook.
4. Press Start to begin dialing.
- Return the handset to its cradle
or press Hook to cancel the call.
( 0 9 / 1 2 / 1 9 9 8 1 5 : 2 5 )
( T E L . I N D E X )
( N O O F F I C E ]
1 N O O F F I C E ]
36