Brother INTELLIFAX 3650 - Manual (Page 28)

HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. SMOOTHING
Smoothing enhances the appearance of
incoming faxes.
If you set SMOOTHING to ON, you will
receive messages with the smoothing
enhancement.
ON/OFF
ON 61
2. BEEPER
You can adjust the volume of the beeper with
this function.
OFF/LOW/HIGH
LOW 26-27
3. C0VERP6
ON/OFF
If you set COVERPAGE to ON, you can send
your documents with a Cover Page generated
by youT fax machine. When the COVER -
PAGE setting is ON, you can select a Cover
Page comment.
ON/OFF
OFF 5i
5. USER
4. ERROR RE-TX
If you set ERROR RE-TRANSMISSION to
ON, the fax machine automatically sends
the page again after sta error occurs.
ON/OFF
OFF 57
OPTIONS
5. REDUCTION
You can avoid having your incoming data
separated by printing a reduced copy of the
incoming document. The reduction methods
are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
AUTO 63-64
6. RCD PAPER
You can select one of 3 sizes of paper. The
machine automatically will adjust the size of
the incoming document or original document
so that it fits the paper sizeyou have selected.
LETTER/LEGAL/A4
LETTER 62
7. TONER SAVE
You can extend the life of the toner by
conserving its use.
ON/OFF
OFF 65
8. SLEEP MODE
This mode reduces power consumption when
the fax machine is idle. The time period
before the fax machine drops into Sleep
Mode is user selectable.
00-99 minutes
OOMIN 25
9, PRINT
DENSITY
You can adjust Print Density with this
function.
— 65
20