Press start, Sbnuing haxti), Dual access – Brother INTELLIFAX 3650 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BASIC FAX TRANSMISSIONS
SbNUING hAXti)
2. Enter a fax number.
Example: One Touch dialing.
3 . P r e s s
Start.
The fax machine starts scaiming the docu
ment and the display indicates the job
numbers and how much memory is avail
able. Then the fax machine will start
dialing if
it
is not sending, receiving or
printing the other documents.
[ N J O F F I C E
)
( M E M O R Y # 0 1
1 0 0 % )
( D I A L I N G # 0 1
)
( S E N D I N G # 0 1
P . 0 1 )
Dual Access
If the document feeder is empty, you can place a document in the feeder, set temporary settings
except for Timer and Polling, dial a number, and begin scanning fax into memory, even when the
fax machine is receiving a fax or sending a fax from memory. The screen displays the new job
number and how much memory is available.
NOTE: Your fax machine can store 13 messages, including the document that is being sent. If
the memory is full or you try to send the 14th message, the fax machine will dial and
send the fax in real time (that is, dial, connect, scan and send without using the
memory). If the fax machine is idle, it dials immediately. If the fax machine is busy
sending or receiving, the display shows FAX RESERVED #XX and prompts you to enter
the next reserved fax. The fax machine begins dialing as soon as the current job is
finished.
Memory usage is flexible and your fax machine allocates it in segments while you are receiving,
the memory available for sending will be reduced.
m
If You Get a MEMORY FULL Message
If the memory becomes full when scanning page one, the display shows "PRESS
STOP KEY", then press Stop to abort the job. If the memory becomes full on page
2 or more of a multi-page document, you will be prompted to press Start to send the
portion already scanned, or Stop to abort the job.
41