Press start to set, Check that the display says, Registered – Brother INTELLIFAX 3650 User Manual

Page 83: Hang up the handset, Start to set, I stop to cancel, Setting the distinctive ringing function

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OJSiTiNr.TJVK JilNGINC,

RI-ChIVING FAXES AND OTHER CAM S

8. Press

Start

to set.

Check that the display says

REGISTERED.

(If the other number was called,
press

Stop

to cancel.)

9. Hang up the handset.

( S T A R T T O S E T

i S T O P T O C A N C E L ]

: )

( R E G I S T E R E D

After you complete this one-time setup:

1. The Distinctive Ringing function automatically will be changed from SET to ON. Distinctive

Ringing operates in Manual mode, so you must keep the Fax and F/T lights turned

oit;

2. Be sure to have a friend call you on both numbers to test that everything is set up correctly.

3. If you do not complete this function by pressing the Start key to register a number, your

machine will stay in D/R SET MODE. So, if you decide not to register a number, you must

repeat Steps 1~6 and in Step 4 change the mode to OFF.

How to Turn the Distinctive Ringing Function ON or OFF

____________

The distinctive ringing function is designed to accommodate the distinctive ringing service (a
telephone service that provides you with multiple numbers, each with a distinctive ring pattern,

on one line). You can change the distinctive ringing function setting to ON or OFF as needed after

you have registered the distinctive ringing number in the function called Setting the Distinctive
Ringing Function. To change the setting, repeat Steps 1~6; Step 4 is where you can select either

ON or OFF.