Brother INTELLIFAX 3650 - Manual (Page 29)

HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1.T0NE/PULSE
There are two different dial t 5 ^es and you
must select the type of signal suitable for
your telephone line.
TONE/PULSE
TONE 26
2. RING DELAY
This is the number of rings before the fax
machine answers the call when in F/T or Fax
Mode.
0/1/2/3/4 rings
2 59
3. SPEAKER
VOLUME
You can adjust the speaker volume with this
function.
OFF/LOW/HIGH LOW 66
6, TEL
OPTIONS
4. F/T RING
TIME
F/T RING TIME sets the time for simulated
ringing in F/T mode.
10/20/30/60 seconds
20 61
5. RING VOLUME
The settings are OFF/LOW/HIGH. HIGH 66
6. DISTINCTIVE
If you have distinctive ringing service from
your phone company, you can use this
function to register the ringing pattern of
your fax number. And if you set it to ON, you
can use the registered number as a fax
number only.
OFF/ON/SET
OFF 74-75
7, CALLER ID
You can display the last 30 Caller IDs that
are stored in the memory.
— 77
1. DATE/TIME
If you enter the date and time in 24-hour
format, the LCD will display the date and
time and they will be printed on outgoing
faxes. 01/01/1999
00:00
27
7. SETUP
2. DAILY TIMER
If you frequently have delayed jobs, all for
execution at same time each day, you can
program that time. Once you register it, you
do not need to enter that time, just set Timer
Transmission in temporary settings.
00.00 43-44
SYSTEM
3. INTERVAL
You can select the time interval at which the
activity report is printed.
6/12/24 hours, 2/4/7 days, OFF
OFF 96-97
4. STATION ID
You can enter your name or company name,
fax number and telephone number in
STATION ID.
It is printed at the top of each page of every
outgoing fax. It is also printed on the
automatic Cover Page.
— 28-29
21