Brother INTELLIFAX 3650 - Manual (Page 17)

btIUP & PKtPAI-íAl lUN BhhUkh Ubh
FOI'J YOUR INFORMATION
Roll Over Phone Lines
A roll over phone system is a group of two or more separate telephone lines that pass
incoming calls to each other if they are busy. The calls are usually passed down or
“rolled over” to the next available phone line in a preset order.
Your fax machine can work in a roll over system as long as it is the last
number in the sequence so the call can not roll away. Do not put the fax machine
on any of the other numbers. When the other lines are busy and a second fax call is
received, the fax call is transferred to a line that does not have a fax machine.
Two Line Phone System
A two line phone system is nothing more than two separate phone numbers on the
same wall outlet. The two phone numbers can be on separate jacks (RJll) or
combined into one jack (RJ14). Your fetx machine must be plugged into an RJllJack.
RJll and RJ14 jacks may be equal in size and appearance and both may contain 4
wires (black, red, green, yellow). To test the type of jack, plug in a two line phone and
see if it can access both lines. If it can, you must separate the lines for your fax
machine.
Converting Telephone Wall Outlets
There are three ways to convert to an RJll receptacle. The first two ways may
require assistance from the telephone company. You can change the wall outlet from
one RJ14jacktotwo RJll jacks. Or, you can have an RJ11 wall
outlet installed and
slave or jump one of the phone numbers to it. The third way is the easiest. Buy a
triplex adapter.
You can plug a triplex adapter into an RJ14 wall outlet. It will separate the wires into
two separate RJll jacks (line 1, line 2) and a third RJ14 jack (lines 1 and 2). Plug the
fax machine into L2 of the triplex adapter.
■RJ14
LI L 2 L 1 +L 2
t 1
UJ.
!
R J l l R J l l R J 1 4
T r i p l e x A d a p t e r
9