Manual reception (manual mode), Automatic fax reception (fax mode), Setting the ring delay – Brother INTELLIFAX 3650 User Manual
Page 67: Press function, Ring delay
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC SETUP TO RECEIVE FAXES
RECEIVING FAXES AND OTHER CALLS
Manual Reception (Manual Mode)
When you sot. tbp. Auswpr М
о
Н
р
to Manual, you must answor aach incnming call yourself. Hera
is what you should do when using Manual Mode:
If You Gret a...
1. Regular phone call
2. Phone call and request
to send a fax
3. Fax tone...
Then You Should...
Talk as you normally would.
Press
Start
when finished talking, and replace the handset.
NOTE: Sender must also press Start.
Press Start, and replace the handset.
Automatic Fax Reception (Fax Mode)
You can automatically receive all your faxes in Automatic Fax Reception mode (Fax light is ON).
Select this mode by pressing Mode.
Setting the Ring Delay
You can set the number of rings before the fax machine will answer the line.
1.
Press
Function.
2. Press 6
.
3. Press 2
.
4. Press (left arrow) or (right
arrow) repeatedly until you find
the number of rings you want.
Example; 00.
When you set 00, you can receive your
incoming faxes with no rings,
5. Press
Set.
6. Press Stop to exit.
C
( 0 9 / 1 2 / 1 9 9 8 1 5
: 2 5 )
( 1 . T E M P . S E T T I N G S )
( 6 . T E L O P T I O N S
)
( 2 . R I N G D E L A Y
)
(H
ung
d e l a y
.-02
( S E L E C T « - - » &
S E T )
( R I N G D E L A Y i O O
)
: )
( 2 . R I N G D E L A Y
59