Brother INTELLIFAX 3650 - Manual (Page 53)

ADVjiNCED FAX TRANSMISSIONS SENDING FAXES
8. Press Stop.
9, Enter the fax number.
10. Press Start.
The fax machine will wait until the
specified time to call.
C
( E N T E R K A X N O . J
i P R E S S S T A R T K E Y ^ )
: )
( N J O F F I C E
3
( 0 9 / 1 2 / 1 9 9 8 1 5 : 2 5 )
Broadcasting
Broadcasting is automatically sending the same fax message to multiple fax numbers. Using the
Broadcast key, you can include up to 40 One Touch locations, up to 100 Speed Diallocations, and
up to 50 manually dialed numbers (maximum of 190 locations if you do not use up any
locations
for Groups, access codes or credit card numbers). However, available memory will vary with the
types of jobs in memory and number of locations used for broadcasting. If you broadcast to more
than the maximum locations available, you will not be able to set up transmissions using dual
access and the timer.
However, the easiest way to broadcast is to first combine frequently used One Touch and Speed
Dial numbers as a Group, which uses up a One Touch key. (Remember, you can have up to six
Groups and auto dial numbers can be included in more than one Group.) Then by pressing
Broadcast between each location, you can include One Touch, Speed Dial, Groups, and manual
dialing using the dial pad in the same broadcast. Use the Telephone Index to help you choose the
numbers easily.
After the Broadcast is completed, a Broadcast Report will be printed automatically to let you know
the results.
FOR YOUR INFORMATION
Cutting Familiar with the Broadcasting Function
* To stop the broadcast in progress, press Stop. The LCD display asks if you want
to cancel all locations or only the location that is being sent.
* Enter the long dialing sequence numbers as you normally would, keeping in mind
that each key coimts as one location, so the number of locations you can call
becomes limited.
* If the line is busy or for some other reason a connection could not be made while
broadcasting, the fax machine will redial the number automatically. (See page
43.)
* If the memory is full, press Stop to abort the job or press Start to send the portion
that is in the memory (if more than one page has been scanned.) (See page 41.)
45