A&D Weighing HW-200KV-WP - Manual (Page 65)

HV-WP/HW-WP Series Page 63
17.3. OP-04, Options
Lower limit value
A lower limit value is stored. The set value is a 5 digit numerical value with a polarity
sign and does not contain a decimal point.
Template LO, [parameter]
Command
Reply
The lower limit value is stored.
Caution The lower limit value must be less than the upper limit value.
Accumulation data output
The accumulated data is output.
Template A
Command
Reply
Accumulation count output
The number of accumulated data is output.
Template N
Command
Reply
Reset of Accumulation data and number
The data and number of accumulations become zero.
Template CA
Command
Reply
The data and number of accumulations become zero.
Final value
The final value is stored. The set value is a 5 digit numerical value with a polarity sign
and does not contain a decimal point.
Template S0, [parameter]
Command
Reply
The value is stored.
Preliminary value
The preliminary value is stored. The set value is a 5 digit numerical value with a
polarity sign and does not contain a decimal point.
Template S1, [parameter]
Command
Reply
The value is stored.
Zero band
The zero band is stored. The set value is a 5 digit numerical value with a polarity sign
and does not contain a decimal point.
Template S2, [parameter]
Command
Reply
The value is stored.