A&D Weighing HW-200KV-WP - Manual (Page 37)

HV-WP/HW-WP Series Page 35
12. Full/Dribble Batch Function
12.1. Preparation (Setting Parameters)
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is
pressed and held. The function table is displayed.
Step 2 Press the
ENTER switch to display an item of the
comparator function ( f6 ).
Step 3 Select a parameter of the full/dribble batch function
( f6 9 ) with the ∧ switch.
Step 4 Press the
ENTER switch to store the new parameter
and display an item of the full/dribble batch
sub-function (
f10 ) .
Step 5 Select a parameter of the full/dribble batch
sub-function ( f10 0 ~ f10 3 ) with the ∧ switch.
Step 6 Press the
ENTER switch and the F switch to display
end .
Step 7 Press the
ENTER switch to return to the normal
weighing mode.