beautypg.com

Options, Extension cable (op-02) – A&D Weighing HW-200KV-WP User Manual

Page 58

background image

Page 56

HV-WP/HW-WP Series

17.1. Extension cable (OP-02)

17. Options

17.1. Extension Cable (OP-02)

This cable is used for installing the indicator away from the base unit.
This loadcell cable is 5m long.
Refer tos " 5.1. Removing the Pole" for the way to remove the pole.

Caution

Calibrate the scale after connecting this cable.

Do not connect more than two extension cables.




































Note
The pan shape depends
on the scale model.

Connector board

Packing C

Connector case

Tapping screw

M4x10 of accessory

5m extension cable

2m loadcell cable (at least).

Base unit

Indicator

Indicator holder

To be purchased separately as an option.

AX:043005266

Cap

Attachment

The loadcell cable from the base unit.

Connect to the rear connector on the

connector board.

Extension cable

Connect to the indicator.

Connect to the front connector

on the connector board.

This manual is related to the following products: