A&D Weighing HW-200KV-WP - Manual (Page 46)

Page 44 HV-WP/HW-WP Series
15. The Function Table
15. The Function Table
The function table is the function to store and refer items that determine the
performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.
15.1. The Procedure for Setting Parameters
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is
pressed and held. The function table is displayed.
Step 2 Set parameters for each item using the following
switches.
∧ switch Selecting the parameter of an item.
＜ switch Selecting a figure.
F switch Proceeding to Step 3 without storing the
parameter.
ENTER switch Storing a parameter for the current item
and proceeding to the next item.
Step 3 When the end of the table is reached,
end is
displayed.
Step 4 Press the ENTER switch to store the new parameters
and return to the normal weighing mode.