A&D Weighing HW-200KV-WP - Manual (Page 30)

Page 28 HV-WP/HW-WP Series
10. Accumulation Function
10.2. Operation and Performance (Examples)
Example 1
Weighing each article, the scale makes the accumulation according to f8 3 .
Step 1 Press the MODE switch to display .
Step 2 Press the
ZERO switch to reset the accumulation data.
Step 3 Return to the kg mode using the
MODE switch.
Step 4 Put an article on the weighing pan. Wait for the stability mark to be displayed and
the value to be blinking. Remove the article and press the ZERO switch.
Step 5 Weigh additional articles using step 4.
Step 6 Press the
MODE switch to display the number of articles and total mass with .
Example 2
This example accumulates the articles that were removed from the weighing pan. The
function parameter is set to f8 4 .
Step 1 Enter into the kg mode using the MODE switch.
Put all articles on the weighing pan and press the TARE switch.
Step 2 Press the
MODE switch to display .
Step 3 Press the
ZERO switch to reset the accumulation data.
Retun to kg mode with the MODE switch.
Step 4 Remove an article from the weighing pan. Wait for the stability mark to be
displayed and the value to be blinking. Press the TARE switch.
Step 5 Weigh additional articles using step 4.
Step 6 Press the
MODE switch to display the number of articles and total mass with .