Switches – A&D Weighing HW-200KV-WP User Manual
Page 17
HV-WP/HW-WP Series
Page 15
6.2. Switches
Display and Symbols
Meaning
A
Does not display zero when the scale is turned on.
Remove anything that is on the weighing pan.
Perform zero point calibration.
Or
The weight value is unstable due to drift or vibration
when the scale is turned on.
A breeze or vibration may be affecting the
measurement.
Check around the weighing pan.
A
A
A
Accumulated data count.
A
A
Total mass value of the accumulated data.
A
A
Comparator function, display is an upper limit.
Full/dribble batch function, the display is a final value.
A
A
Full/dribble batch function, the display is a preliminary
value.
A
A
Comparator function, display is a lower limit.
Full/dribble batch function, the display is the zero band.
A
A
CAP. MAX. 3/6/15kg d=1/2/5g
Description of the weighing unit, weighing range and
measurable minimum mass.
Example: Displays the weight value by 5 g up to 15 kg.
Displays the weight value by 2 g up to 6 kg.
Displays the weight value by 1 g up to 3 kg.
A
A
6.2. Switches
Display and Symbols
Meaning
A
Display ON/ OFF switch.
Note Standby status when power is connected.
A
A
A
ZERO switch.
When there is nothing on the weighing pan and the
ZERO
switch is pressed, the scale displays the mass value of zero
and the zero point mark. Net is canceled, if it is displayed.
A
A
A
A
TARE switch.
Canceling the mass of a receptacle, case, bag, etc. which is
put on the weighing pan, and does not weigh its mass.
A
A
A
RANGE switch, SAMPLE switch.
Changing weighing range for HV-WP series.(Refer to f2 )
Storing the unit mass, it is used to select a sample number.
In the function table, it is used to select a parameter.
A
A
A
A