A&D Weighing HW-200KV-WP - Manual (Page 51)

HV-WP/HW-WP Series Page 49
16. RS-232C Serial Interface
16. RS-232C Serial Interface
16.1. Data Format
Bit Format
Format 1
There are four headers for the type of data and weighing condition.
Stable weighing data Unstable weighing data
Stable counting data Out of range ( Over)
The weighing data consists of 9 characters including decimal point and polarity.
The polarity is always output.
There are three units. The unit is 3 characters.
In case of "out of range", numbers become all 9’s.
The terminator is always output as CR LF.
Data in the unit of kg
Counting
mode
Percentage
mode
Out of range
Definition of symbols
CR (carriage return) LF (line feed)
0Dh 0Ah
Space
20h
S T , + 0 0 0 1 2 . 4 0 c k g
Header Weighing value Unit Terminator
Q T , + 0 0 0 0 3 0 0 0 c P C
S T , + 0 0 0 3 0 0 . 0 c c %
O L , + 9 9 9 9 9 . 9 9 c k g
Polarity
Header Weighing value Unit Terminator
Header Weighing value Unit Terminator
Header